Single Gate
Description
Expamet Security Products Gates are manufactured to the highest specification in order to meet all of the client’s requirements and to complement all of fencing range. Our gates are manufactured from rolled hollow section steel with expanded metal infill welded into position.
The gates incorporate lockable sliding latches or hasps plus drop bolts, gate posts can be supplied with fence starter angles to allow each fencing system to run in all directions from a single post.
Increased security is achieved with the use of a tamper proof hinge cover.
All gates are hot dipped galvanised to BS EN ISO 1461:1999.
.............................................................................................
Materials
-
Mesh types available depending on requirements – 4095, 2089 and 7732
-
Fence and brace sizes all RHS
-
Vertical Members and Horizontal Members
Up to 3 metres wide, 50 x 50 x 3mm 50 x 50 x 3mm
-
3 metres to 5 metres, 50 x 50 x 3mm 50 x 50 x 3mm
-
5 metres to 7 metres, 60 x 60 x 4mm 50 x 50 x 3mm
-
7 metres +, 60 x 60 x 4mm 50 x 50 x 3mm
Gate Post Sizes all RHS
Up to 3 metres wide 100 x 100 x 4mm
-
3 metres to 5 metres 120 x 120 x 5mm
-
5 metres to 7 metres 150 x 150 x 6.3mm
-
7 metres + 180 x 180 x 6.3mm
Soil plate welded to bottom
-
Specification changes as the gate width increases
-
Gates can also be supplied with adjustable hinges with anti lift and tamper proof fixings.
-
Locking device is a sliding bolt as standard, other types are available on request.
.............................................................................................
Assembly Items
-
Extension to gates can be accommodated with toppings such as barbed wire, razor wire, anti vandal scaling barrier and raptor.
-
Powder coating is also available to BS649 with a range of colours.
-
All gates are hot dipped galvanised to BS EN ISO 1461:1999
